Metal with Paper Corner Tape Used for Building Material
Metal Corner tape, namely corner tape with steel, is flexible paper drywall tape with galvanized steel strips or aluminum strips to effectively protect corners in houses and buildings not to get wear and tear. The tape is easier to use than traditional metal corner bead. Our steel corner tape is packaged in rolls making it easier to merchandise and transport. It can be used on archways and curves, on any inside or outside angle.
Base materials:Paper tape+alumium strips or paper tale +galvansized steel
1.Reduce the corner surce wear.
2.Protect the corner from the impacting.
3.Prolong the service life of the corner.
4.Help the corner keep a perfect status.
-Material of high-quality paper, high-quality galvanized steel strip & aluminium strip
-Fast construction, easy installation
-Laser perforation, or needle perforation, with good air permeability
-Make surface rough on one side or two sides to stick well
-Two galvanized steel strips & aluminum strips with center crease on paper, easy for corner finishing
-Protect corners in houses and buildings not to get wear and tear, destroyed
The steps to use it is as follows:
-Apply a pre-coat of compound to the corner
-Cut corner tape to length, then fold and crease so that metal strips are on inside
-Apply tape to corner, pressing firmly into compound, trowel each side clean and smooth.
-When dry, apply light finishing coats, sand and decorate.
|Packing:||Carton Packing, 1Roll/Box, 10Rolls/Ctn & 10Rolls/Ctn|
|Trade Mark.:||Depack Tape, KYSUN Tape|
|Transportation:||Shipment By Sea or By Air|
|Metal Liner:||galvanized steel strips or aluminum strips|
|Standard:||50mm x 10m, 50mm x 20m, 50mm x 30m,|
Product Categories : Corner tape