50mm X 150m Paper Tape Used for Plasterboard Gap Jointing
Paper Drywall Joint Tape is a quality tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing and wallpapering. It is super strong material for both wet and dry wall. The tape edges offer invisible seams. It can be stuck to plasterboard, cement and other building materials completely and prevent against the cracks of wall and its corner. Meanwhile, it can use together with Fiberglass self-adhesive mesh tape, make the building decoration and installation easier.
1. High tensile strength to resist tearing, stretching and distortion
2. Roughened surface for superior bond
3. Accurately center-creased to improve corner treatment
4. Heavy Joint Tape Provides extra strength and crack-resistance in drywall joint treatments.
5.It has a unique cross-fiber construction that provides greater drywall joint strength and crack resistance.
|TYPE||DRYWALL JOINT TAPE|
|SIZE||50X23 , 50X50 , 50X75, 50X150|
|Tear Strength(Vertical/Horizontal,N/m2)||≥ 9/10|
|SURFACE||SMOOTH / ROUGH|
|Sparkper Forated Strength(KPa/m2)||≥ 1.8|
|Tensile Strength Dipped Water(KN/m)||≥1.2/0.7|
|PACKAGING||24 PCS PER CARTON|
|PORT OF LOADING||SHANGHAI PORT OR NINGBO PORT|
1.What we do?
We are the professional manufacturer of building material from china
2.What is our goal?
Create greater value for our customers.
3.Why choose us?
We focus on the gypsum board industry 30 years.
We have 15 years of export business experience.
We are more professional and efficient.
4.What is our website?
5.What I can do for you?
Save your time, save your costs and create maximum benefits for you
6.What's certificate we can provide?
7.What are the advantages of our products?
A Grade top quality, full size and more higher stability
8.What are our talent advantages?
We have 5-10 years.
We have more professional product knowledge.
We understand the target market better.
We are the best partner for you
9. How to Finish Wallboard Joints:
1). Firmly press joint compound into wallboard joints over an approximate 4" Wide area.
2). Center Joint Paper tape in compound, over hidden crack and embed tape into compound. Cover tape with a thin coat of compound. Remove excess.
3). Make sure nail heads are driven in at least 1/32" . Apply joint compound to nail head indentations.
4). After bed coat compound is completely dry (at least 24 hours) apply another thin coat of compound and feather out to a 3" - 4" Width on each side. Apply second coat to nail heads.
5). Allow the preceding coat to dry and apply another thin coat, feathering out to a total width of about 8" On each side. Apply final coat to nail heads.
6). When completely dry, at least 24 hours after final coat, sand smooth.
Finishing Inside Corners: Apply compound to both sides of corner. Crease tape and embed. Apply a thin coat on both sides of tape. When dry, apply a second coat to one side only. Let dry, then finish the other side. When dry, sand until smooth.
Finishing Outside Corners: Use broad knife to apply the joint compound over the corner bead flange for the outside corners. The first coat should be approximately 6" Wide, and the second coat 6" - 10" Wide applied on each side of corner.
Product Categories : Paper tape
Premium Related Products